The Firing Line Forums - View Single Post

ZeSpectre · November 6, 2010, 08:36 AM

DISCLAIMER: the following loads are for informational purposes only. Anyone using these loads does so at their own risk.

I use 5.0gr of Unique behind a 115gr Berry's plated for plinking loads.
I use 5.9gr of Unique behind115gr Hornady 35540 XTP for more "serious" loads

Both run well in all of my 9mm

Unique meters just fine out of my RCBS UniFlow measure unless I get below 4 grains and then it gets a little erratic so I don't use Unique in .380 anymore.

November 6, 2010, 08:36 AM	#11
ZeSpectre Senior Member Join Date: June 4, 2007 Location: Shenandoah Valley Posts: 3,276	DISCLAIMER: the following loads are for informational purposes only. Anyone using these loads does so at their own risk. I use 5.0gr of Unique behind a 115gr Berry's plated for plinking loads. I use 5.9gr of Unique behind115gr Hornady 35540 XTP for more "serious" loads Both run well in all of my 9mm Unique meters just fine out of my RCBS UniFlow measure unless I get below 4 grains and then it gets a little erratic so I don't use Unique in .380 anymore. __________________ "The dogs may bark but the caravan moves on"