The Firing Line Forums - View Single Post

RwBeV · November 25, 2011, 08:56 PM

You dont have to destroy the barrel to get it off take a hack saw and just in front of the reciver about a 1/32" cut a slot all the way around the barrel about an 1/8" to 3/32" deep. I usaually turn them in a lathe but you can do it buy hand. If done close enough to the reciver you can almost unscrew it buy hand. If your talking about rechambering that thing without pulling the barrel man thats one hell of a lot of hand turning. Good luck

Bob

November 25, 2011, 08:56 PM	#4
RwBeV Senior Member Join Date: November 13, 2006 Location: Wyoming Posts: 112	You dont have to destroy the barrel to get it off take a hack saw and just in front of the reciver about a 1/32" cut a slot all the way around the barrel about an 1/8" to 3/32" deep. I usaually turn them in a lathe but you can do it buy hand. If done close enough to the reciver you can almost unscrew it buy hand. If your talking about rechambering that thing without pulling the barrel man thats one hell of a lot of hand turning. Good luck Bob __________________ A friend will help you hide, a real friend will help you hide the body's.