View Single Post
Old December 9, 2018, 08:58 AM   #6
jpx2rk
Senior Member
 
Join Date: December 29, 2015
Posts: 225
You don't mention if the bullet tips are mis-shaped/crushed after seating but I had a problem with a LEE seating die for my 204R. Called Lee and they recommended I drill out the seater plug a bit using a common drill bit to allow for variances in bullet construction. Solved my problem. Might try that, or try cleaning the seater die, might be some crud in there. GL
jpx2rk is offline  
 
Page generated in 0.02824 seconds with 8 queries