|
Talk about timeing....Im not using ultra sonic but Im purchasing a counter top parts cleaner and will use mineral spirts for the solvent for cleaning the pistols....cost is $160 + tax, and its by Graymills and is 151/2" wide by 23 1/2" long by 6" deep with a soaking depth of 3 3/4" and function with as little as two gallons of solvent.....while I was at it I priced a pump to make a tube for my barreled actions...I plan on using 12" around pcv with end cap and using mineral spirits again and the submersible pump, Im considering using air through the bottom of the tube to help clean......the pump is $70 + tax....
Years ago I used a sonic cleaner on a 12ga sbs savage/fox and it stripped the blueing off because in my ignorance i left it in too long....lol..
I also use a low pressure air compressor one of those small ones to blow the stuff out of the mechanisms.....if any of yall choose to do that use low pressure...fubsy.
[This message has been edited by fubsy (edited March 07, 2000).]
|