Thread: The HK MP 5
View Single Post
Old October 23, 1998, 09:15 PM   #18
Hilton
Member
 
Join Date: October 14, 1998
Location: Ft. Lauderdale, FL
Posts: 69
The MP5/10, which was apparently incorrectly designated in Rainbow Six as the MP10, is still currently in production from HK. The guns include a new translucent gray polymer magazine design which is easy to take down, but somewhat bulkier than the 9mm versions. The prototypes showed a lug system that allowed the magazines to be assembled together, ala "jungle clipping", but the production models lack that feature. The standard HK dual mag clamp is available for the 10mm/.40 mags. The MP5/10 also boasts a bolt hold open on the last shot, much like the M16. Reloading can be completed by using the bolt catch lever instead of the usual drill of bolt back, mag out, mag in, bolt forward. The MP5/10 is available with two bolt roller locking pieces (I forget if that's the absolute correct nomenclature) for high and low impulse 10mm ammo. With the "lite" 10mm ammo, the gun in action is hardly any different than the 9mm. The 10mm brass looks like popcorn when ejected -- cracked cases are not unusual. HK says this is normal!? Only time will tell if the 10mm and .40 versions will be as durable as the extremely robust 9mm guns.
Hilton is offline  
 
Page generated in 0.02974 seconds with 8 queries