The Firing Line Forums - View Single Post - RCBS 10-10 inconsistent zero?

S_Constitutionist · January 13, 2013, 06:15 PM

Thank you very much for your detailed reply.

The scale is brand new, but I have NOT cleaned the parts. I will try that first.

The pointer is semi-sinusoidal, with occasional "catching" as you call it during decay. This does not happen all the time which could be causing the inconsistency. Makes sense to me.

I have already turned off the heater and all fans in the house, but I'll try the box trick if there are still issues. There is no binding or any contact with the dampner or pointer.

I'll post back with results. Thanks again!

January 13, 2013, 06:15 PM	#4
S_Constitutionist Senior Member Join Date: April 21, 2009 Posts: 325	Thank you very much for your detailed reply. The scale is brand new, but I have NOT cleaned the parts. I will try that first. The pointer is semi-sinusoidal, with occasional "catching" as you call it during decay. This does not happen all the time which could be causing the inconsistency. Makes sense to me. I have already turned off the heater and all fans in the house, but I'll try the box trick if there are still issues. There is no binding or any contact with the dampner or pointer. I'll post back with results. Thanks again!