The Firing Line Forums - View Single Post

MilJunkie · April 15, 2013, 05:42 PM

Timneys are GREAT if you can spend the money. Huber Concepts are not much cheaper and not worth it IMO

You will read of many mods to these triggers. Some are better than others, but a couple things I have found:

Shims on the sear create the most possibility of slam fire, because the sear is moved down.

On some target rifles, the Finns beveled the sear on the sides down about 1mm so that the top was only about 1mm wide, so when engaged it has a full surface, but the top is thinner and releases easier.

Installing a Finn M27 trigger with a pinned sear also makes a big difference in creep and release.

April 15, 2013, 05:42 PM	#4
MilJunkie Junior Member Join Date: April 15, 2013 Posts: 8	Timneys are GREAT if you can spend the money. Huber Concepts are not much cheaper and not worth it IMO You will read of many mods to these triggers. Some are better than others, but a couple things I have found: Shims on the sear create the most possibility of slam fire, because the sear is moved down. On some target rifles, the Finns beveled the sear on the sides down about 1mm so that the top was only about 1mm wide, so when engaged it has a full surface, but the top is thinner and releases easier. Installing a Finn M27 trigger with a pinned sear also makes a big difference in creep and release. Last edited by MilJunkie; April 17, 2013 at 06:19 PM.