Just an FYI for those that think you have to use lead data with plated bullets this is from Berry's. I personally have never used lead data for plated bullets.
Quote:
Plated bullets occupy a position between cast bullets and jacketed bullets. They are soft lead, but have a hard outer shell on them. When loading plated bullets we have found best results using low- to mid-range jacketed data in the load manual. You must use data for a bullet that has the same weight and profile as the one you are loading. Do not exceed mid-range loads. Do not use magnum loads.
Velocities depend on the caliber, but as a rule of thumb, we recommend you don't shoot our plated bullets over 1250 feet-per-second. Our 44's actually shoot best around 1150 fps. 45's are generally good at 850-900 fps. Our bullets are not recommended for magnum velocities over 1250fps unless the bullet description denotes a thick plated bullet with a higher listed maximum for velocity.
|