|
This is not the first time such an adventure showed up here. I'd be real careful not to make things worse.
Hydraulics are generally better than hammers.
Access to a lathe or a gunsmith with a lathe will help.
What you need is a cap that will screw on to the 1/2 - 28 muzzle threads. And that cap needs to accept a grease zerk (1/16 pipe thread) or the 1/8 in pipe thread that is on the outlet tube of the grease gun. Maybe you can convince a local gunsmith he needs one in his tool box.
Turn your gas block to close the gas port.Start pumping grease in the bore.
I'd think you could generate the psi to push it out.
|