View Single Post
Old September 12, 2012, 10:20 PM   #3
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
.1gr is barely within the resolution of your scale. You can't really be sure you're even increasing on every load.
Newberry's recommendation of 0.7-1% is perfectly safe. I increase 0.3gr with max loads of 28.0gr.
If max is 48.0, 0.7% would be .336, so use .3 or .4. Either would be fine. No danger.
__________________
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
 
Page generated in 0.02541 seconds with 8 queries