The Firing Line Forums - View Single Post - Old style Dillon D-Terminator Scale

rwilson452 · July 21, 2005, 04:02 PM

1) power it up

2) when it settles press and HOLD the grams/grains "button" untill the 700 flashes

2) press OFF it should now indicate CAL 0

3) place the 700gr test weight on it.

4) wait, it should indicate CAL F

5) remove the test weight

your done.

press zero again and your ready.

you can also place your pan on the scale and press zero and you will read just the charge weight.

July 21, 2005, 04:02 PM	#2
rwilson452 Senior Member Join Date: June 10, 2004 Location: Tioga co. PA Posts: 2,647	Dillon D-Teminator calibration 1) power it up 2) when it settles press and HOLD the grams/grains "button" untill the 700 flashes 2) press OFF it should now indicate CAL 0 3) place the 700gr test weight on it. 4) wait, it should indicate CAL F 5) remove the test weight your done. press zero again and your ready. you can also place your pan on the scale and press zero and you will read just the charge weight.