The Firing Line Forums - View Single Post - Remington 700 VLS .204 tight spring/loading

justducttapeit69 · April 22, 2010, 11:35 PM

I have a remington 700 .204 in which i close the bolt it is very tough, i have trimmed all my cases to the proper trim legnth. Its like the bolt will close properly but i have to push forward on the bolt pretty hard. It feels almost like a spring is stopping it. I cleaned the bolt and everything and the headspacing should be fine. Any ideas would be great. This is my first post on this forum. So I hope I did this right. thanks if y'all help!

April 22, 2010, 11:35 PM	#1
justducttapeit69 Junior Member Join Date: April 22, 2010 Posts: 3	Remington 700 VLS .204 tight spring/loading I have a remington 700 .204 in which i close the bolt it is very tough, i have trimmed all my cases to the proper trim legnth. Its like the bolt will close properly but i have to push forward on the bolt pretty hard. It feels almost like a spring is stopping it. I cleaned the bolt and everything and the headspacing should be fine. Any ideas would be great. This is my first post on this forum. So I hope I did this right. thanks if y'all help!