I talked to a rep at nosler, he said to go from 23-25 grains for the Varmageddon 55grain for Varget. Because I didn't find anything using IMR4064 I did some numbers and decided to try the same min and max load data. The consistency I got at 23.6 and 24.5 was awesome. I wish I had a chrono to test the speeds. My best grouping with Varget were at the low end. I have tested these before but with different brass.
This was my first time using IMR4064 though
Last edited by mohr308; July 15, 2012 at 09:49 PM.
|