The Firing Line Forums - View Single Post

cheygriz · March 4, 2007, 01:49 PM

I use a Dillon 650. For pistol cases, first, I wash in warm water and liquid tide in my rotary tumbler. Then I fill the hoppers and load. all done!

For bottleneck rifle cases, I have a toolhead dedicated to an RCBS decappng die. I decap, wash and dry, spray lube with Dillon spray, ***(Not Hornady one-shot! I've stuck cases in the die with that stuff!)*** load normally, then tumble in corncobs and mineral spirits to remove the lube.

March 4, 2007, 01:49 PM	#3
cheygriz Senior Member Join Date: May 11, 2002 Location: high up in the rockies Posts: 2,289	I use a Dillon 650. For pistol cases, first, I wash in warm water and liquid tide in my rotary tumbler. Then I fill the hoppers and load. all done! For bottleneck rifle cases, I have a toolhead dedicated to an RCBS decappng die. I decap, wash and dry, spray lube with Dillon spray, *(Not Hornady one-shot! I've stuck cases in the die with that stuff!)* load normally, then tumble in corncobs and mineral spirits to remove the lube. __________________ If you think a mighty military force is expensive, wait 'til you see what a weak one costs.