The Firing Line Forums - View Single Post

Dustin0 · April 16, 2009, 10:30 AM

Ok so Sorry for the question but here goes. I have Mauser action that I am building a 243 bench rifle out of. There are a few stamps on the gun I would like to grind off or cover up. The main thing is the fact is there 7.62 on the top of it in very large print. The gun will not be chambered in that round. Any advice would helpful. BTW this is the 1st time have built something like this, and I KNOW I cannot do this around the serial number.

April 16, 2009, 10:30 AM	#1
Dustin0 Senior Member Join Date: May 15, 2008 Location: Louisville, KY Posts: 701	Covering Stamping Ok so Sorry for the question but here goes. I have Mauser action that I am building a 243 bench rifle out of. There are a few stamps on the gun I would like to grind off or cover up. The main thing is the fact is there 7.62 on the top of it in very large print. The gun will not be chambered in that round. Any advice would helpful. BTW this is the 1st time have built something like this, and I KNOW I cannot do this around the serial number.