The Firing Line Forums - View Single Post - XD/XDM Trigger Jobs Review: Springer Precision vs. Powder River Precision

Uncle Malice · April 2, 2011, 08:12 PM

For the Powder River kit, where I had to lightly grind up on the lower part of the sear face to allow proper functioning of the grip safety - the photo below shows where I had to remove the little bit of material from.

Note: This is actually documented in the installation instructions that come with the Powder river kit, complete with illustrations.

April 2, 2011, 08:12 PM	#5
Uncle Malice Senior Member Join Date: May 11, 2009 Location: Phoenix Posts: 4,580	For the Powder River kit, where I had to lightly grind up on the lower part of the sear face to allow proper functioning of the grip safety - the photo below shows where I had to remove the little bit of material from. Note: This is actually documented in the installation instructions that come with the Powder river kit, complete with illustrations. __________________ Handguns: 2x Glock 19.4 \| Glock 26.4 \| HK USP 9 \| HK P2000 \| HK VP9 SK \| HK P30 \| CZ Shadow 2 \| CZ P-10 C \| CZ P-07 \| CZP-01 \| S&W 360PD Rifles: DDM4 \| SGL 21 \| SAM7K \| Draco \| PSA PDW SBR \| ASA Side-Charger SBR \| CZ Scorpion K SBR \| Aero M4E1 9" 300blk SBR \| Angstadt Jack9 SBR \| Savage Mark II FV-SR Shotguns: Mossberg 590A1 20" SP \| Mossberg Shockwave