The Firing Line Forums - View Single Post

Peter M. Eick · February 7, 2001, 07:37 AM

Thanks

I had cleaned everything pretty well, but I learned last night not well enought.

I took apart the measure assembly and found that I was pretty gentle in tightening up the drop tube into the uniflow. It was loose, so that may be part of my problem.

I also noticed a bit of "crud" had built up in the pistol funnel tube. This may also be my problem.

I will clean them again and see how it goes.

On the primer flipping sideways, I appreciate your advice. I will have to experiment and see if I can get the feel of it.

pete

February 7, 2001, 07:37 AM	#5
Peter M. Eick Senior Member Join Date: August 3, 1999 Location: Houston, Texas Posts: 2,991	Thanks I had cleaned everything pretty well, but I learned last night not well enought. I took apart the measure assembly and found that I was pretty gentle in tightening up the drop tube into the uniflow. It was loose, so that may be part of my problem. I also noticed a bit of "crud" had built up in the pistol funnel tube. This may also be my problem. I will clean them again and see how it goes. On the primer flipping sideways, I appreciate your advice. I will have to experiment and see if I can get the feel of it. pete __________________ 10mm and 357sig, the best things to come along since the 38 super!