View Single Post
Old November 19, 2017, 03:08 PM   #10
hounddawg
Senior Member
 
Join Date: March 1, 2009
Posts: 4,232
here is how to fix it at least on the Rock Chucker Supreme
https://imgur.com/Y0dIK0d

notice the 1/4 inch gap between the back of the primer catcher and the frame and how the primer catcher rides away from the ram

attach a 1/4 inch thick piece of foam, cardboard, wood or what ever you have handy to the back of the primer catcher with tape or hot glue so the primer catcher rides snugly against the ram

https://imgur.com/a/klDOe

then get a plastic drinking straw from a fast food joint and cut a 2 inch piece and drop it into the hole in the ram . That will stop the odd primer from popping out the slot in the front

This is an easy fix and I would think that RCBS would fix this issue by altering the primer catcher so it would ride snugly against the ram and putting a bevel on the inside of the primers exit tube so that if one hits the rim it bounces back in.

Saying everyone else does it too is a sad excuse. My daughter learned not to try that excuse before she was six years old
__________________
“How do I get to the next level?” Well, you get to the next level by being the first one on the range and the last one to leave.” – Jerry Miculek

Last edited by hounddawg; November 19, 2017 at 06:22 PM.
hounddawg is offline  
 
Page generated in 0.03088 seconds with 8 queries