Thread: 22 match ammo
View Single Post
Old November 8, 2018, 03:45 PM   #14
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 17,953
A complete teardown and cleaning of every individual part may well be in order. The fouling problem NSB referred to is getting enough wax in the chamber so the rounds are cushioned and slowed by it as they chamber. This results in all the excess headspace being forward of the rim. When you try to fire it, some of the energy from the firing pin blow is absorbed by seating the round the rest of the way into the chamber through that high viscosity lube, and that can be enough to cause a failure to fire.

Solvent-soak and dry and treat the springs and firing pin and anything they touch for 72 hours in Sprinco's Plate+ Silver and wipe off all the excess. This makes them slip against each other better to maximize firing pin energy.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
 
Page generated in 0.02849 seconds with 8 queries