View Single Post
Old May 27, 2010, 02:57 AM   #8
ogree
Senior Member
 
Join Date: January 18, 2005
Location: Idaho
Posts: 151
gunuserfixer,

Rule of thumb for any firearm is:
Firing pin protrusion should be no more than half the diameter of the firing pin.
.050 dia. firing pin = .025 protrusion.

Of course very few firearms will have the optimum protrusion, some will have a little more and some a little less.
ogree is offline  
 
Page generated in 0.02879 seconds with 8 queries