View Single Post
Old December 22, 2019, 10:11 AM   #134
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 7,132
Quote:
If what I'm seeing is correct, the case head is actually tilting to stretch/meet the bolt face?
I don't think so, I don't think the cartridge would go into battery if that were the case. what I think might be happening--for whatever reason--is that at the moment of failure the rim face is not backed into the bolt breech rim face. EDIT: unless what you mean is after ignition, in which case yes, I think that is a possibility.
Quote:
Also, wouldn't the longer Hornady chamfer result in less material/weaker unsupported case head in that area?...
Can't say, though I don't think so--but I do know the fired hornady brass does not show any of the signs of rim compression or gas leakage (so far) and their load must be pretty stout--in my gun it exceeds their advertised velocity average by about 40 fps. I also can't tell where the top of the head/web actually is in the brass nor even what the specs call for--I see a measure of .2 but it's not clear to me if that's rim face to top of web or not. Guess what needs to happen is cut the brass in half to get to the bottom of that.
__________________
If you’re ever hiking in the woods and you get lost, just look up and find the brightest star in the sky and you’ll know which way space is.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!

Last edited by stagpanther; December 22, 2019 at 10:21 AM.
stagpanther is offline  
 
Page generated in 0.02816 seconds with 8 queries