View Single Post
Old March 24, 2012, 10:41 PM   #688
HUBEL458
Senior Member
 
Join Date: March 8, 2000
Posts: 734
The sabots we are working with, take about 15 different
58cal cast slugs for good fit, with the OD measurement of
sabot at.733" with all of them in. There are 4 Dixie
Gunworks MZ slugs, 6 slugs from Lyman moulds I know of.
Five slugs from Lee moulds.These are mainly muzzleloading
slugs and can be cast varying hardnesses.

Examples-58cal (.575"- .578")
Lee molds for 500gr, 460 gr, 350gr, etc, slugs
Dixie Gunworks slugs of 440gr, 375gr, 490gr, etc, weights.
Lyman 530gr, 510 gr, 460gr, 400gr, 315gr, etc.
And they are all good slugs at a saving especially
when folks cast their own.

I'm getting out info on these to see if any reloading
suppliers will try to get some made, so we will have a
quality, proper OD size sabot, to reload with.



Some stuff about sabots. I get questions about how
to reload them for accurate fast loads in plastic cases
for regular hunting and target use. Have to tell them we need
to have proper OD size sabot.. Most want sabot loads and not
fullbore cast....Why, they want lighter for less recoil in
regular weight guns, they figure smaller slugs cheaper,
they won't have leading with sabots if using cast, don't
have to lube and don't need gas checks if cast, cast slugs
for sabot use cheaper than jacketed. These parameters cover
a lot of shotgun only deer hunters trying to afford doing
their own loads, trying to be as accurate as expensive
factory sabot stuff and hoping the savings will allow much
more shooting.In the 1st is 440gr 58cal Dixie, and second,
one I like better a 510gr from Lyman mould. Third slug from
a Lee 460gr 58cal mould. 4th is various 58cal slug ideas.



Here is picture of a nice Armi San Marco 20ga break action
we found, that we're testing loads in. I really like
the style of this gun. I'm going to have extra barrel setup,
an extra heavy 585cal barrel and put my long 585HE in it,
to go along the other 585HE single shots 585HEs we have
setup on NEFs, and CBCs.



Here is a picture of nice Greener Martini 12ga, with new stock,
and a heavy rifled bull barrel, a fellow redid.
Such great work. And very accurate. All these guns need like
all singleshots, including break actions, are heavy barrels
and they shoot great and are easy to shoot with the
extra weight.

__________________
ED HUBEL
HUBEL458 is offline  
 
Page generated in 0.02906 seconds with 8 queries