The Firing Line Forums - View Single Post

Hutch · September 25, 2000, 10:58 AM

Before I got the Dillon (smug grin), I used to run my RCBS Junior pretty hard to keep up with IHMSA, Hunter Pistol and bowling pins. In order to achieve any thru-put, I'd use 2lb butter tubs for the "before" and "after" operation. If you try, you can do the ol' "dentist office transfer" trick, whereby you remove the sized (or whatever) case from the shell holder with 2 fingers, and then immediately insert the next case with the same hand. As the ram goes up, pitch the sized case in the finished tub, and grab another case to operate on. Goes fairly quickly.

September 25, 2000, 10:58 AM	#3
Hutch Senior Member Join Date: February 12, 2000 Location: Birmingham, AL Posts: 1,124	Before I got the Dillon (smug grin), I used to run my RCBS Junior pretty hard to keep up with IHMSA, Hunter Pistol and bowling pins. In order to achieve any thru-put, I'd use 2lb butter tubs for the "before" and "after" operation. If you try, you can do the ol' "dentist office transfer" trick, whereby you remove the sized (or whatever) case from the shell holder with 2 fingers, and then immediately insert the next case with the same hand. As the ram goes up, pitch the sized case in the finished tub, and grab another case to operate on. Goes fairly quickly.