The Firing Line Forums - View Single Post

Road_Clam · January 19, 2021, 09:58 AM

I have the Kimber Target II LS in 10mm and its a flawless shooter now. I did have FTFs and FTEs when it was new. Kimbers tend to be very tight when new. The 10mms also come with very stiff mag springs. It took about 400 rounds before i started seeing better functioning consistiency. I also did a light polishing on all my guide rails with 600 emery and some oil. This helped quite a bit. Like others commented try shooting rh and lh and try resting your thumb on top of the slide lock lever and add downward pressure whil shooting to try to isolate the locking issue.

January 19, 2021, 09:58 AM	#8
Road_Clam Senior Member Join Date: November 21, 2013 Location: New Hampshire Posts: 1,695	I have the Kimber Target II LS in 10mm and its a flawless shooter now. I did have FTFs and FTEs when it was new. Kimbers tend to be very tight when new. The 10mms also come with very stiff mag springs. It took about 400 rounds before i started seeing better functioning consistiency. I also did a light polishing on all my guide rails with 600 emery and some oil. This helped quite a bit. Like others commented try shooting rh and lh and try resting your thumb on top of the slide lock lever and add downward pressure whil shooting to try to isolate the locking issue. __________________ "To be old an wise you must have been young and stupid"