View Single Post
Old February 24, 2021, 08:52 PM   #13
jrothWA
Senior Member
 
Join Date: November 11, 2006
Posts: 2,454
May I suggest...

Glue some 320 grit emery paper onto a 1/4" or 3/8" dowel rod {wood], and lightly apply to the feed ramp surface to smooth that surface . [just enough to polish it], then when using soft-nose ammo, will minimize any stuttering of feeding that type of ammo.

My carbine was detailed when I bought it and the ejector spring was full of grease, so the bolt was detailed.

when sighting in completely tighten the front band screw and fire a group then back off three turns and fire a group, until the group grow larger.
jrothWA is offline  
 
Page generated in 0.03226 seconds with 8 queries