View Single Post
Old May 26, 2019, 05:18 PM   #12
wild willy
Senior Member
 
Join Date: March 8, 2006
Posts: 361
Use a self tapping screw or even a dry wall screw run it in as far as you can without hitting the primer.Put it in the shellholder on the press rise ram grip screw with pliers lower ram.A larger diameter screw works best.Pliers or vise grips usually just rip pieces of jacket off it will work with gas checks too
wild willy is offline  
 
Page generated in 0.04040 seconds with 8 queries