The Firing Line Forums - View Single Post - Actual distance to rifling

DAVID NANCARROW · October 9, 2013, 05:12 AM

Thank you Unclenick-the issue I have is not with stiff ejection of the fired case, but camming the bolt down on my reloads. I keep the fired brass trimmed to spec and remove the burr whenever I have to cut it down. Still, I think I'm going to get that Redding body die as it seems to do what I want it to.

I've been very pleased with the collet die for the years that I've used it. The case neck run out is nil. Actually better than using the Redding full length sizing die, but that might be a subject for discussion on another thread.

October 9, 2013, 05:12 AM	#30
DAVID NANCARROW Senior Member Join Date: November 5, 2000 Location: Wyoming Posts: 1,761	Thank you Unclenick-the issue I have is not with stiff ejection of the fired case, but camming the bolt down on my reloads. I keep the fired brass trimmed to spec and remove the burr whenever I have to cut it down. Still, I think I'm going to get that Redding body die as it seems to do what I want it to. I've been very pleased with the collet die for the years that I've used it. The case neck run out is nil. Actually better than using the Redding full length sizing die, but that might be a subject for discussion on another thread.