|
Old Stony is suggesting the same thing I did
1) polish the barrel
2) degrease with acetone
3) mount the barrel such that you can rotate it. A piece of brass inserted into the barrel, with one end of the brass slipped into a pipe that is secured in a vise. This allows you to remove the barrel without touching it via the brass rod.
4) propane torch. Heat to 200-225f
5) use cotton swap to apply Belgian blue evenly
6) apply torch
7) immerse in boiling water for 5 min
8) card with oil free wire brush
9) repeat steps 4-8 3x.
10) don't touch. apply oil. Let it cure for 24 hrs.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
|