View Single Post
Old January 17, 2013, 06:44 PM   #2
polyphemus
Senior Member
 
Join Date: June 24, 2012
Posts: 1,055
Guru 1911ananda says...
The firing pin stop should fit snug but not so tight that you need tools to remove it,once it is in place it does not interfere with firing pin travel regardless
of fit,if you are having trouble inserting or removing chances are it is out of
specs,replace it if you are not comfortable fine grinding parts.
polyphemus is offline  
 
Page generated in 0.02333 seconds with 8 queries