Quote:
|
Most (all) the causes of sooty cases I've experienced, regardless of the powder, was from loads too light for an efficient burn and not sealing the case to the chamber.
|
That's my understanding as a whole as to why you get that issue regardless of cartridge . It's clear to me that with the exception of Titegroup I don't have or use a powder that can safely be loaded at a level that would achieve what I want . That's the point of my inquiry . Rather then me buying another 4 to 8 pounds of different powders and testing them all which would cost a good amount in not only the powders but the rest of the components to do so . I figured I come here and ask you all to help me narrow down the search .
I put very strict requirements as to narrow down the suggestions . I belive it worked but I still got recommendations from #3 to #53 on the two burn rate charts I check most . I'm looking now at anything in the #13 through #31 area and really concentrating on the upper 2/3 of that list as being the most likely to get me where I want to be . AS you can see I only have one of those .
https://www.hodgdon.com/PDF/Burn%20R...02015-2016.pdf
http://www.gamaliel.com/images/BurnRatesnov10.pdf
__________________
If Jesus had a gun , he'd probably still be alive !
I almost always write my posts regardless of content in a jovial manor and intent . If that's not how you took it , please try again .
