View Single Post
Old February 27, 2013, 06:02 PM   #2
James K
Member In Memoriam
 
Join Date: March 17, 1999
Posts: 24,383
Possible? Probably. Easy? Maybe.

It depends on how well the maker stuck to specs, and how complete the replacement frame is. If you have to install the spring tunnel and the grip screw bushings it will be a bit more difficult. If the holes are drilled crooked or are in the wrong place, things can go down hill pretty fast.

At best, the swap will be easy, just a matter of basically disassembling the gun and re-assembling it with another frame. Since the same maker made both frames that should be the case.

Jim
James K is offline  
 
Page generated in 0.03211 seconds with 8 queries