View Single Post
Old September 16, 2018, 06:51 PM   #17
ThomasT
Senior Member
 
Join Date: January 22, 2009
Location: Texas
Posts: 2,746
Hi Chowder. I just used a coffee cup and a 1/2" wood dowel with end sanded into a round shape. No big deal to do. The powder grinds easily.

And if you have some 3F it will work. The secret is to just get enough powder down the channel to push the stuck ball out of the barrel.

If you try this and the ball doesn't come all the way out make sure you push the ball back down to the breech. Then load with powder again. If you need to put a little liquid bore cleaner down the bore to soften the fouling.
ThomasT is offline  
 
Page generated in 0.03209 seconds with 8 queries