|
My manual says the max oal should be 3.300 or 3.330 finshed i dont have it in front of me right now. My question was using my hornady oal length tool and comparator my over oal on a completed shell and bullet would be 3.850 and that number is from the base of the case to the ogive on a 160 acubond touching the lands. Now if i back it off. 010 that would give me 3.750 correct.now that is ruffly. 500 inches longer than a factory loaded rounds max oal correct? The finished oal tip of bullet to base of case is almost 4" is this ok
|