[Clark]

My shcpeal about accuracy for the average guy like me:

There is a whole lot of benchrest ritual that is a waste of time, money, and effort in the pursuit of a 1" group.
It may or may not help getting a .15" group to improve to a .149" group, but it has nothing to do with getting a guy who shoots 2.5" groups to shoot a 1" group.

Big effect on accuracy
1) shoot when there is no wind
2) get a high power scope
3) practice dry firing and keeping cross hairs on bullseye
4) clean out Copper fouling in bore
5) good bullets
6) No expander ball use
7) jam bullet into lands
8) heavy gun and light bullet
9) float the barrel
10) keep barrel cool
11) expensive bull barrels
12) make sure scope mounts are tight to receiver

Little or no effect on accuracy
1) True the action face
2) true the inner C ring
3) lap the lugs
4) true the bolt face
5) chase the threads
6) speed up the lock time
7) glass bed the action
8) pillar bed the action
9) get a 1 ounce trigger
10) turn the case necks
11) weigh the brass
12) de burr the flash holes
13) weigh each powder charge
14) try different powders
15) use benchrest primers
16) lap the scope rings.
17) Dial in bore when chambering
18) re crown the muzzle