The Firing Line Forums - View Single Post

Bogie · August 7, 2001, 05:31 PM

Those 10 and 14 gallon Rubbermaid tubs for tools and stuff... Then I've got a bunch of .30 and .50 cal ammo cans - Usually the .30 cal for holding bullets, and heavy stuff, and the .50 cal for holding loaded rounds... The big green MTM "hunting" boxes are good for shotgun shells, loose brass, bulk loading... When filled with .223, however, they're really too heavy to be lifting, since the top can break.

I've got several toolboxes, and a 5' folding table that goes to the range... A dolly with wheels is also VERY important.

Powder stays in the jugs until used, and the jugs tend to just sorta fill up rubbermaid containers... BTW, if you've got any 8208 lying around that you don't want, e-mail me with the lot number...

August 7, 2001, 05:31 PM	#18
Bogie Senior Member Join Date: June 5, 2000 Location: Job hunting on the road... Posts: 3,827	Those 10 and 14 gallon Rubbermaid tubs for tools and stuff... Then I've got a bunch of .30 and .50 cal ammo cans - Usually the .30 cal for holding bullets, and heavy stuff, and the .50 cal for holding loaded rounds... The big green MTM "hunting" boxes are good for shotgun shells, loose brass, bulk loading... When filled with .223, however, they're really too heavy to be lifting, since the top can break. I've got several toolboxes, and a 5' folding table that goes to the range... A dolly with wheels is also VERY important. Powder stays in the jugs until used, and the jugs tend to just sorta fill up rubbermaid containers... BTW, if you've got any 8208 lying around that you don't want, e-mail me with the lot number... __________________ Job hunting, but helping a friend out at www.vikingmachineusa.com - and learning the finer aspects of becoming a precision machinist. And making the world's greatest bottle openers!