The Firing Line Forums - View Single Post - Colt-Walker Cylinder Jam

Wobble · June 23, 2009, 09:57 PM

Had the same problem on my Uberti Walker. I adjusted the wedge slightly to correct the problem but wasn't happy that the gap was that tight. I filed down the barrel forcing cone a bit, polished it off, and re-blued it. Problem solved.

June 23, 2009, 09:57 PM	#8
Wobble Senior Member Join Date: April 20, 2009 Location: Georgia USA Posts: 163	Had the same problem on my Uberti Walker. I adjusted the wedge slightly to correct the problem but wasn't happy that the gap was that tight. I filed down the barrel forcing cone a bit, polished it off, and re-blued it. Problem solved.