The Firing Line Forums - View Single Post

Bill in NM · February 10, 2000, 02:38 PM

I just dropped off a box of Winchester Small Pistol primers for him to try. He's also checking with Speer for a correct OAL. I'm going to try a box of his Federal SP primers in one of my loads to see if I start flattening them.
As far as the crimp goes, he says the he used a dial caliper to set it to what the book says.
CrowShooter,
He's already concerned about overpressure. Wouldn't rifle primers increase pressure?
I'm trying to get him to register here so that he can talk to you directly, but not sure if he will or not.
Thanks for all the help/suggestions.
Bill

[This message has been edited by Bill in NM (edited February 10, 2000).]

February 10, 2000, 02:38 PM	#8
Bill in NM Member Join Date: January 21, 2000 Posts: 95	I just dropped off a box of Winchester Small Pistol primers for him to try. He's also checking with Speer for a correct OAL. I'm going to try a box of his Federal SP primers in one of my loads to see if I start flattening them. As far as the crimp goes, he says the he used a dial caliper to set it to what the book says. CrowShooter, He's already concerned about overpressure. Wouldn't rifle primers increase pressure? I'm trying to get him to register here so that he can talk to you directly, but not sure if he will or not. Thanks for all the help/suggestions. Bill [This message has been edited by Bill in NM (edited February 10, 2000).]