View Single Post
Old February 9, 2017, 02:04 AM   #52
Junior member
Join Date: December 23, 2016
Posts: 30
It may disappoint you to know that McMillan did not know everything.
He made really fine barrels. I doubt that he has as much experience with crappy factory barrels as some of us. I know for a fact that some rougher barrels do benefit from some break in shooting. If you only shoot the finest custom barrels you will probably not have that experience either. But try 50 or 60 factory barreled rifles and see what happens from round one to about round 200.

Quoting McMillian
Posted: 09-25-1999 10:10
The break in fad was started by a fellow I helped get started in the barrel business . He started putting a set of break in instructions in ever barrel he
shipped. One came into the shop to be installed and I read it and the next time I saw him I asked him What was with this break in crap?. His answer
was Mac, My share of the market is about 700 barrels a year. I cater to the target crowd and they shoot a barrel about 3000 rounds before they
change it. If each one uses up 100 rounds of each barrel breaking it in you can figure out how many more barrels I will get to make each year. If you
will stop and think that the barrel doesn't know whether you are cleaning it every shot or every 5 shots and if you are removing all foreign material that
has been deposited in it since the last time you cleaned it what more can you do? When I ship a barrel I send a recommendation with it that you clean it
ever chance you get with a brass brush pushed through it at least 12 times with a good solvent and followed by two and only 2 soft patches. This
means if you are a bench rest shooter you clean ever 7 or 8 rounds . If you are a high power shooter you clean it when you come off the line after 20
rounds. If you follow the fad of cleaning every shot for X amount and every 2 shots for X amount and so on the only thing you are accomplishing is
shortening the life of the barrel by the amount of rounds you shot during this process. I always say Monkey see Monkey do, now I will wait on the
flames but before you write them, Please include what you think is happening inside your barrel during break in that is worth the expense and time you
are spending during break in
ireload2 is offline  
Page generated in 0.03503 seconds with 8 queries