|
I've found the best way to do a trigger job on the Pietta Remingtons is to boost the hammer. That is done by putting your thumb between the hammer and frame at full cock and putting about ten pounds of pressure on the hammer with the other thumb while you pull the trigger. Do this about twenty times aand you will have a very smooth trigger pull. This burnishes the two surfaces together. One of the main problems with the Pietta Remingtons is the depth of engagement of the sear in the hammer which makes for a really long pull. I put a pin in the hammer in front of the full cock notch to limit the engagement. Both of the above give a really nice crisp trigger.
|