The Firing Line Forums - View Single Post - Barrel Re-Thread

Gunplummer · January 11, 2013, 07:41 PM

I agree with Scorch, orrrrr it is only a 9MM. There may be enough room to turn down the shank, thread it to a smaller diameter thread, and them make a sleeve that threads onto the barrel with the correct thread on the OD of the sleeve. If you want the original stampings that is an option. It has been done before.

January 11, 2013, 07:41 PM	#10
Gunplummer Senior Member Join Date: March 11, 2010 Location: South East Pa. Posts: 3,364	I agree with Scorch, orrrrr it is only a 9MM. There may be enough room to turn down the shank, thread it to a smaller diameter thread, and them make a sleeve that threads onto the barrel with the correct thread on the OD of the sleeve. If you want the original stampings that is an option. It has been done before.