The Firing Line Forums - View Single Post - Steyr-Hahn extractor question

Satanic Toaster · January 23, 2013, 06:54 PM

Thanks for the help. I got the extractor changed out from one pistol to the other. The one I needed to change was pretty much worn completely down.

However the pistol is still having the same problem. I will load the pistol and the slide will feed the round until the slide gets to be about 1/16" out of full lockup and then it will not budge. I have to force the slide back to get the round out of the chamber.

Any ideas as to what might cause this?

January 23, 2013, 06:54 PM	#3
Satanic Toaster Senior Member Join Date: June 29, 2009 Location: Kentucky Posts: 153	Thanks for the help. I got the extractor changed out from one pistol to the other. The one I needed to change was pretty much worn completely down. However the pistol is still having the same problem. I will load the pistol and the slide will feed the round until the slide gets to be about 1/16" out of full lockup and then it will not budge. I have to force the slide back to get the round out of the chamber. Any ideas as to what might cause this? __________________ In Hoc Signo Vinces