The Firing Line Forums - View Single Post

sdm7773 · June 12, 2009, 11:53 PM

On the left side of the frame just behind the trigger, there is a button just below the slide. When pushed flush, pull gently on the trigger guard. Remove the spring assy. making sure not to let spring plug go flying. Cock hammer and move the slide back as far as you can. Lift the rear of the slide up and then off of the end of the barrel. Re-assemble in reverse order.

June 12, 2009, 11:53 PM	#5
sdm7773 Junior Member Join Date: June 12, 2009 Posts: 2	Star Model 1906 On the left side of the frame just behind the trigger, there is a button just below the slide. When pushed flush, pull gently on the trigger guard. Remove the spring assy. making sure not to let spring plug go flying. Cock hammer and move the slide back as far as you can. Lift the rear of the slide up and then off of the end of the barrel. Re-assemble in reverse order.