The Firing Line Forums - View Single Post

Uncle Buck · June 12, 2012, 10:53 PM

http://data.hodgdon.com/cartridge_load.asp

Check the powder manufacturers website.

I think I would start around 3.1 grains of powder (about half-way between the two spreads [2.1 - 4.0 grains] reduced by 10%.

You will hardly ever find the exact recipe for the exact components you have on hand, unless you buy every thing all at once.

Welcome to The Firing Line. Be careful, check your measurements and weights twice and have fun. These guys are pretty darn helpful here when you have questions.

June 12, 2012, 10:53 PM	#2
Uncle Buck Senior Member Join Date: June 21, 2009 Location: West Central Missouri Posts: 2,592	http://data.hodgdon.com/cartridge_load.asp Check the powder manufacturers website. I think I would start around 3.1 grains of powder (about half-way between the two spreads [2.1 - 4.0 grains] reduced by 10%. You will hardly ever find the exact recipe for the exact components you have on hand, unless you buy every thing all at once. Welcome to The Firing Line. Be careful, check your measurements and weights twice and have fun. These guys are pretty darn helpful here when you have questions. __________________ Inside Every Bright Idea Is The 50% Probability Of A Disaster Waiting To Happen.