The Firing Line Forums - View Single Post - 270 wsm, H-1000

kilotanker22 · January 17, 2019, 12:47 PM

Shot some more 130 grain game Kings with H-100. 72 and 73 grains if powder and CCI 250.
Both loads are sub minute 3 shots. Here is a photo of them. How I measure the group is outside to outside and subtract bullet diameter. Then divide that by 1.047 to convert inches to MOA. The 73 grain load was pretty stout in recoil. And had a small ejector mark. No burrs or anything. Primer was not cratered or flat.

I will be testing the Berger and the ballistic tip loads at 200 and 300 yards today. Will post those photos after I shoot.

Never mind. Can't upload from my phone. I will do that when I get home

January 17, 2019, 12:47 PM	#30
kilotanker22 Senior Member Join Date: October 14, 2012 Location: North Central, PA Posts: 2,117	Shot some more 130 grain game Kings with H-100. 72 and 73 grains if powder and CCI 250. Both loads are sub minute 3 shots. Here is a photo of them. How I measure the group is outside to outside and subtract bullet diameter. Then divide that by 1.047 to convert inches to MOA. The 73 grain load was pretty stout in recoil. And had a small ejector mark. No burrs or anything. Primer was not cratered or flat. I will be testing the Berger and the ballistic tip loads at 200 and 300 yards today. Will post those photos after I shoot. Never mind. Can't upload from my phone. I will do that when I get home Last edited by kilotanker22; January 17, 2019 at 10:47 PM. Reason: Mispoke