View Single Post
Old November 28, 2011, 10:58 AM   #11
frank_1947
Member
 
Join Date: August 9, 2008
Location: MO
Posts: 76
that is correct all mfg do intence testing before releaseing data , as i said if it is in good condition there should be no problem I load wildcat 30BR all the way to the top and compress the load a good 1/8 inch enuff for brass to hold bullet on a jam, I start out a max, and go backwards, most folks just have a fear of that after 35 years of loading I have never seen a problem with MFG data being to hot they would never take that chance.

Good example I shoot USPSA in open class to make a power factor that is required in a 9mm pistol you must go way above any known data running a 124 gr bullet 1400 fps in a 5 inch gun , worst I seen case head seperation thousands load that round like that.

In 600 yard Benchrest alot of folks go for 99% case capacity thats beyond any data with rem 700s or savage actions.

I should add one more thing if bolt closes easily when loading round your good to go if not dont load ck headspace.

This is just my opinion over the years what I have learned.
__________________
Frank
NRA Certified Rifle Inst.

Last edited by frank_1947; November 28, 2011 at 12:50 PM.
frank_1947 is offline  
 
Page generated in 0.02955 seconds with 8 queries