View Single Post
Old June 9, 2017, 06:47 PM   #2
44 AMP
Join Date: March 11, 2006
Location: Upper US
Posts: 22,469
Welcome to TFL!

I hate to be the bearer of bad news, but Rohm and RG revolvers are not considered good guns. Most of the time, the standard advice is to use them for paperweights. Saturday Night Special is a term often applied to them.

Numrich Arms (The Gun Parts Co.) MIGHT have some parts, They do have some parts they don't catalog, sometimes.

Usually the only way to get parts for a Rohm or similar is to find another one, which still has the parts you need, buy it, strip what you need and junk the rest.

The missing screw's thread pitch can be determined by any shop with a set of thread gauges. (as long as the threaded hole is intact).

Keep it out of respect for your friend, make it a wall hanger, paperweight, maybe encased in Lucite.

You can have the screw and something to function as the cylinder latch button made, and it would return the gun to working condition. Unfortunately, working condition for one of those guns isn't very good, compared to almost anything else.
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is offline  
Page generated in 0.03252 seconds with 8 queries