View Single Post
Old July 19, 2010, 01:05 PM   #3
Senior Member
Join Date: September 19, 2008
Posts: 4,678
Winchester stamped the rear tang, directly behind the hammer:

If your gun has a tang peep sight mounted, the marking will be under the sight base.

IIRC, The barrel should be marked (stamped) with the chambering, just ahead of the action - .25-20 WCF, .32-20WCF , .38-40 WCF/38WCF, OR .44-40 WCF/44WCF.

Last edited by PetahW; July 19, 2010 at 01:17 PM.
PetahW is offline  
Page generated in 0.04072 seconds with 8 queries