|
After wiping the fired cases off of any initial grime, I then use a separate RCBS de-capping die to knock out the spent primers. Then, I brush/clean the primer pockets and also run a brush through the neck. Then, they go into the vibratory cleaner with corn cob media along with a bit of Flitz tumbler/media additive. They get vibrated for about 4 hours and that works quite well for me. I check all the primer pockets for any stuck media once the cases are out of the vibrator, and push the kernels out with a pipe cleaner if necessary. Those cases are now ready to resize and trim if needed.
|