|
you might try seating all your bullets first.have the bullet seater screwed way out of the way. put a empty case in the shellholder and run the ram up.adjust the die down until you feel the crimp shoulder in the seating die touch. ease off a hair. lock you ring and now adjust your seating screw down until your bullet is seated to the desired depth.when you have seated all your bullets,screw the seater up out of the way. unlock the die ring and adjust it down until you get the desired crimp.lock the die and crimp all your rounds. you might considered buying a redding profile crimp die which would keep you from making all these adjustments.good luck.
------------------
cliff
|