View Single Post
Old January 20, 2013, 04:50 PM   #7
rbf420
Senior Member
 
Join Date: August 1, 2009
Posts: 166
Thanks for the tips. I went out and got some spirits threw all my brass in a 5 gal bucket and poured in the spirits and shook the crap out of it. Let it sit awhile shook it again. Then poured out the spirits for later use, then washed out and cleaned of the brass with hot soapy water and then a rise. How would u suggest drying the brass? Im thinking about drying most of it off with a towel and then possibly putting it in the oven on the lowest temp 170 and letting the heat take out the rest of the water inside the case and primer pocket.

I have been looking for some media and that is by far the cheapest place thanks for that tip, am buying some as I type.
__________________
My Calibers- 9mm, .38spl, .357 mag, .45 acp, 30/06, 303 brit, 7.7 jap, 7.5 french.
rbf420 is offline  
 
Page generated in 0.05786 seconds with 8 queries